359 results
-
1-1/2" Abrasive Cones
$5.99Use these 1-1/2" diameter chamfering cones with the Goodson CC-60 mandrel (sold separately) Choose from 80 or 120 grit Aluminum-Oxide abrasive -
Abrasive Cork Super-Fine Finish Polishing Belts
$14.991 belt per box Deliver a satin finish Won't disturb polished radii Silicon-carbide 800 Grit NOTE: All abrasives have a shelf-life therefore Goodson can only guarantee these belts for 1 year from the original purchase date -
Black Diamond Hyper-Finish Replacement Mandrels with Diamond Abrasive
$399.99These Black Diamond Hyper-Finish Mandrel Assemblies from GOODSON come complete with the diamond abrasive and mandrel. There are 8 sizes to choose from covering a range from .193" to .389" (4.90-9.90mm). Replacement abrasives are available. NOTE: Black Diamond Hyper-Finish mandrels are... -
1" Dia. | 120 Grit | Abrasive Flapwheels | AFW-1-120
$10.491" wide 1" Diameter Aluminum-oxide abrasive 1/4" x 20 threaded -
CBN Super Abrasive for Cast Iron Diesel Heads
from $149.99Only for cast diesel heads with hardened pre-cups. Fits all overhead surfacers with 1/2 in. diameter tool tip capacity. Will NOT work on standard cast heads. Choose from .375" and .500" diameter. 1/8 in. thick. Won't chip. Always cut using the dull... -
2" Dia. | 120 Grit | Abrasive Flapwheels | AFW-2-120
$11.991" wide 2" Diameter Aluminum-oxide abrasive 1/4" x 20 threaded -
Manual Ring Filer Diamond Abrasive Wheel | PRF-870-DW
$63.99This Diamond Abrasive Wheel for Manual Ring Grinders measures 2"OD x 1/4"ID x 1/16" thick. It will fit both the obsolete PRF-870 and the PRF-500 Manual Ring Grinders. -
Replacement Abrasive Wheel | PRF-250W
$19.99Always keep an extra abrasive wheel on hand. Measures 2-1/2" OD x 7/16" ID x 1/8" Thick. 120 Grit Silicon-Carbide. -
6" CBN Flywheel Stone | 2367275
$257.99Measures: A = 6" | B = 4-5/8" | C = 1-7/8" | 1-1/4" Arbor CBN Flywheel Grinding Stones are designed for use only on Cast Iron flywheels. Their graphite aluminum core minimizes dressing and 1/8" thick CBN material will provide... -
U69693 | BIG-BRUTE Silicon-Carbide Flywheel Grinding Stone
$64.99Measures: A = 6" | B = 4-1/2 | C = 3" | 1-1/4" Arbor Medium-Hard 3/4" thick Silicon-Carbide Abrasive for ductile iron, cast-iron and steel -
Fine Ring Deburring Abrasive Stick | RS-103
$35.99This fine abrasive stick is radiused for easier ring deburring after end-gapping. Measures 4"L x 1/2" radius. Works on all types of rings and all ring IDs. TECH TIP: Fine abrasive sticks work great for deburring the ends of piston... -
ACB-224 : Abrasive Belt Dresser
$10.49Hold dresser at a 45° angle to a moving belt Removes foreign material to restore the cutting ability of the grains Measures 2" x 2" x 4" Use with Goodson Crankshaft Polishing Belts -
3" Dia. | 120 Grit | Abrasive Flapwheels | AFW-3-120
$13.991" wide 3" Diameter Aluminum-oxide abrasive 1/4" x 20 threaded -
F336036 : 3" x 1-1/4" x 5/8" Valve Refacer Wheel
$49.99For General Purpose Cup Grinding Fit Rottler VR-7 Valve Refacer and all Kwik-Way except VL Measures 3" x 1-1/4" x 5/8" Cup Wheel -
U357854 | 6" Silicon-Carbide Flywheel Grinding Stone
$62.99Dimensions: A = 6" | B = 4-1/2 | C = 2-1/2" | 1-1/4" Arbor Medium-Soft abrasive Silicon-Carbide Abrasive for ductile iron, cast-iron and steel -
1/2" dia. | 40 Grit | Straight Cartridge Abrasive Rolls | 50 Pk. | SCR-500-40
$34.9940 Grit Aluminum-Oxide 1-1/2" long 1/8" hole Fully Glued for longer life 50 per box -
Radiac Automotive Abrasives
Goodson Tools & Supplies was named in 2015 as the Exclusive Worldwide Distributor of Radiac Abrasives for the Automotive Aftermarket. For your convenience, Goodson has retained all of the original Radiac Abrasives part numbers. Browse the categories below or search... -
34296362 | 3-3/4" CBN Flywheel Stone (60 Grit)
$234.99Measures: A = 3-3/4" | B = 2-5/8" | C = 1-1/2" | 1-1/4" Arbor 60 Grit CBN Flywheel Grinding Stones are designed for use only on Cast Iron flywheels. Their graphite aluminum core minimizes dressing and 1/8" thick CBN... -
Rod and Cap Grinding Wheel | F343793
$126.99For Sunnen and other popular brands 6" x 2" x 1-1/4" Fits CRG 700, 750, 770, 780, 805 and 920K -
3-3/4" CBN Flywheel Stone | 2371052
$259.99Measures: A = 3-3/4" | B = 2-5/8" | C = 1-1/2" | 1-1/4" Arbor CBN Flywheel Grinding Stones are designed for use only on Cast Iron flywheels. Their graphite aluminum core minimizes dressing and 1/8" thick CBN material will provide...
