| |
|
|
CCI-403
C-Clipper Wrist Pin Installation Tool for 20mm pins |
|
Install C-Clips on wrist pins in very little time
Simple 3-step process:
1 - Seat the wrist pin clip on the installer nose
2 - With the sleeve in its V-Block, line it up with the wrist pin bore
3 - Push the installer home. You're DONE! No over-stressing of the clip, no marring of the bore.
Undercut pistons need an undercut sleeve
The threaded portion of the C-clipper sleeve is cut away to clear the overhanging shoulder and skirt of the piston. Use only with the LONG installer and formed Alumnimum depth control V-guide.
IN STOCK
|
Auctions | Classifieds