| |
|
|
CCI-303
C-Clipper Wrist Pin Installation Tool for 14mm |
|
Install C-Clips on wrist pins in very little time
Simple 3-step process:
1 - Seat the wrist pin clip on the installer nose
2 - With the sleeve in its V-Block, line it up with the wrist pin bore
3 - Push the installer home. You're DONE! No over-stressing of the clip, no marring of the bore.
Plain piston - no undercut; wrist pin just short of piston diameter
Sleeve depth is set just outboard of the wist pin bore by rotating the sleeve in the threaded Delrin V-block straddling the piston.
IN STOCK
|
Auctions | Classifieds