Goodson Tech Bulletin Board

Quick question: Will the C-clip installer tool (part # CCI-402) install wrist pin retaining rings LARGER than .790"? Mine are .882" and are used on an old Harley Shovelhead piston/wristpin set up. Thanks for the help. Bruce

What is the bore I.D. of the CL-6302 centering cone?

Thanks Glen

What is the correct size of the 11/32" valve guide bore prior to installing the Thin-Wall .030 Bronze-Liners? What is the maximum allowable valve guide wear to use the thin wall liner?

Looking for a set of cutters for Rotax 914- 912 -and 912S

I purchased a old 402 bbc and found that one of the cylinder heads has 3 worn intake valve guides. I was quoted a price of just less than $300 for repair at United Auto Supply in LaCrosse WI. I think this sucks… is this something that I could repair on my own with the correct tooling to save me some $$$?

do i have to lubricate the grinding wheel while grinding valve seats

I note that you sell an installation tool for LS crank reluctor wheels. I’m in the process of installing a MEFI fuel injection system on my Olds 455. I’ve purchased a 58x GM reluctor which I will machine to adapt to my crank using the existing keyway. Can you provide me with info. on how to clock the reluctor with respect to the sensor and crank TDC so it works with the MEFI computer?

Interesting in your MT-68 multitool. Will this kit work with any grinder or is a specific grinder required? I have a Baldor 3/4HP 3/4" arbor grinder will this kit work with my grinder?

Ian
time2climb@hotmail.com

I have a friend that wants to put bronze liners in bronze guides. That doesn’t sound right to me but has anyone had any luck with that? Should I use a seperate guide liner reamer to ream the bronze guide? Thanks

need valve seat resuface tool for intake and exhaust seats and valve spring extention for my spring compressor for small engines.