480 results
-
Sunnen Honall Valve Guide Mandrels | 1/4"
from $61.12Goodson carries a wide range of Replacement Mandrels for the Sunnen Honall Valve Guide Hone to cover most popular sizes. Select by size. Both sizes listed here fit 1/4" guides Choose sleeves, stones, adaptors and stone retainer separately -
150 Grit Sunnen Honing Stones | 3.5"-5.5" Range | N37-J45-71
$87.10The Sunnen® N37-J45-71 150 Grit Honing Stones have integral holders and come in 4-piece sets that include 2 short stones and 2 short aluminum wipers (2-13/16"). These honing stones will fit both Sunnen® AN and Goodson GH hones. 3.5" - 5.5"... -
Sunnen Nicasil Hone Stone Set | MM33-A43
$93.36These stones fit a cylinder size from 3.3" to 4.2" (84 to 107mm). These honing stones are sized to fit Sunnen AN-style and Goodson GH-style hones. Use with your portable hone to deglaze Nicasil cylinders. 150 Grit aluminum-oxide abrasive. Guideless... -
Sunnen® Master Stone Holder Set | AN-365
$262.00This Master Stone Holder Set from Sunnen® makes it easier to hone large diameter bores. Used with the Sunnen® Master Holder Support (sold separately), these supports extend the range of your standard 4" cylinder honing stone sets. This set (AN-365) is... -
400 Grit Sunnen Hone Stones | 1.58"-1.77" Range | SNJ3-J87
$128.20400 Grit Stones are ideal for fine finishing of previously bored holes in aluminum, bronze and cast iron. Silicon-Carbide stones Stone set consists of 3 stones Sized to fit SNJ-10 hone (sold separately) Gives an 8 Ra finish NOTE: Goodson is... -
400 Grit Sunnen Hone Stones | 1.42"-1.6" Range | SNJ2-J87
$63.81400 Grit Stones are ideal for fine finishing of previously bored holes in aluminum, bronze and cast iron. Silicon-Carbide stones Stone set consists of 3 stones Fit SNJ-10 hone (sold separately) Gives an 8Ra finish NOTE: Goodson is authorized to ship... -
70 grit Honing Stone Set | 2.5" - 2.7" Range | G25-J17
$48.35The Sunnen® G25-J17 70 Grit Honing Stones have integral holders and come in 4-piece sets that include 2 stones and 2 aluminum wipers. These honing stones will fit both Sunnen® AN and Goodson GH hones. 2.5" - 2.7" range (63.5-68.6mm) For Cast... -
Sunnen Honall Valve Guide Mandrels | 5.5mm
from $62.57Goodson carries a wide range of Replacement Mandrels for the Sunnen Honall Valve Guide Hone to cover most popular sizes. Select by size. Sizes listed here all fit 5.5mm guides Other sizes also available -
150 Grit Sunnen Hone Stones | 2.4 to 2.6" Range | V24-J45
$50.85Fits Sunnen Junior Hone Sets have 2 holders with 4" integral stones and 2 holders with integral aluminum wipers 150 grit Silicon-Carbide abrasive produces a 45 Ra finish Previously sold as JN-202 NOTE: Goodson is authorized to ship Sunnen Products exclusively... -
Sunnen Truing Sleeves | .195"-.200" Range | S-195
$36.50Truing Sleeves are used to ensure the guide shoes and stones are straight and parallel to each other and radiused to approximately the diameter to be honed. Goodson stocks Sunnen® Truing Sleeves in a wide range of sizes. Range: .195"... -
Sunnen Align Honing Stones | RY24-J45
$168.65These Sunnen Align Honing Stones are packaged 5 per box (requires 10 stones). Recommended for Aluminum. Other align hone stones available. -
280 Grit Sunnen Honing Stones | 1.75"-2.0" Range | S18-J65
$86.40Sets have 2 holders with 4" integral stones and 2 holders with integral aluminum wiper Gives a 20Ra finish Previously sold as SN-500 Sized to fit the Sunnen SN-75 Midget Hone -
400 Grit Sunnen Hone Stones | 3.3"-4.2" Range | MY33-J85
$167.22Special stones for ported cylinders. These specially designed stones allow the hone to pass the intake and exhaust ports while maintaining consistent pressure to remove material accurately and easily. Range: 3.3" - 4.2" (83.8 - 106.7mm). Give a 20Ra finish. -
30-45-60 Degree VSC Standard Valve Seat Cutter | VSC-06045
$178.99Use with your Sunnen VSC system. 30º Top Angle | 45º Seat Angle | 60º Throat Angle 1.0mm (.040") Seat Width | Profile #2. Ideal for AMC, Austin, BMW, Chevrolet, Ford, Mercedes, Mitsubishi, Nissan & Volvo. -
280 Grit Sunnen Hone Stones | 1.42"-1.6" Range | SNJ2-J63
$128.20280 Grit Stones are ideal for fast material removal on deburred, bored, ground and reamed holes in Aluminum, Bronze and Cast Iron. Silicon-Carbide stones Stone set consists of 3 stones Fit SNJ-10 hone (sold separately) Gives a 45Ra finish NOTE: Goodson is... -
400 Grit Sunnen Lifter Bore Honing Stones | Y20-J87
$164.70Stones fit all Lifter Bore Mandrels Work on all common lifter bore materials: cast iron, brass, steel 400 Grit 12 per box NOTE: Goodson is authorized to ship Sunnen Products exclusively within The United States and Canada. -
280 Grit Sunnen Honing Stones - 3.3"-4.2" Range | MY33-J65
$167.22Special stones for ported cylinders. These specially designed stones allow the hone to pass the intake and exhaust ports while maintaining consistent pressure to remove material accurately and easily. Range 3.3 to 4.2". Give a 20Ra finish. -
Replacement Guide Shoes for CR-Mandrels
from $16.19Replacements for Sunnen CR-Series Mandrels 2 Guide Shoes per box Goodson is authorized to ship Sunnen products only to selected areas such as the US and Latin America. For more information, please contact Goodson. -
VR-1701 | Valve Refacer Stem Wheel
$285.99Cup Profile. Fits the Sunnen VR-7000 and VR-8000 Centerless Grinders. -
220 Grit Sunnen Honing Stones | 2.7" - 4.1" Range | M27-J55-71
$84.62The Sunnen® Brand AN-300-71 220 Grit Honing Stones have integral holders and come in 4-piece sets that include 2 short stones and 2 short aluminum wipers (2-13/16"). These honing stones will fit both Sunnen® AN and Goodson GH hones. 2.7"...
