480 results
-
Sunnen Honing Stones for CR-1900 Mandrels & Larger
from $43.48Rod honing stones for Sunnen CR-Series mandrels Select by mandrel size and application 2 stones per box -
280 Grit Sunnen Honing Stones | 3.5"-5.5" Range | N37-J65-71
$50.17The Sunnen® Brand AN-501-71 280 Grit Honing Stones have integral holders and come in 4-piece sets that include 2 short stones and 2 short aluminum wipers (2-13/16"). These honing stones will fit both Sunnen® AN and Goodson GH hones. 3.5" -... -
Sunnen® Master Stone Holder Set | AN-355
$262.00This Master Stone Holder Set from Sunnen® makes it easier to hone large diameter bores. Used with the Sunnen® Master Holder Support (sold separately), these supports extend the range of your standard 4" cylinder honing stone sets. This set (AN-355)... -
Sunnen Honall Adaptor | PK10-A
$126.69Range: .308" to .362" (7.8mm to 9.2mm) Use these mandrel adaptors with your Sunnen Honall Hone Head (sold separately). Use with K, BL, AK, BAL or Y Mandrels. -
15-30-60 Degree VSC Standard Valve Seat Cutter | VSC-08030
$178.99Use with your Sunnen VSC system. 15º Top Angle | 30º Seat Angle | 60º Throat Angle 2.0mm (.080") Seat Width | Profile #1. Ideal for high performance. -
Sunnen Nicasil Hone Stone Set | NN40-A43
$65.49Deglaze Nicasil cylinders with your portable hone 150 Grit Aluminum-Oxide abrasive Resizing cylinders requires diamond abrasive Fit AN and GH hones. -
Sunnen Cork Honing Stones | 4.0"-5.6" Range | NN40-C05
$132.04For AN-style hones and hone bodies. Integral holder type sets have 4 pieces: 2 holders with stones and 2 holders with aluminum wipers. Range: 4.0" to 5.6" (101.6 to 142.2mm) Finish: 3 Ra on Cast Iron, 2 Ra on Hard... -
Sunnen Truing Sleeves | .270"-.280" Range
from $34.42Truing Sleeves are used to ensure the guide shoes and stones are straight and parallel to each other and radiused to approximately the diameter to be honed. Goodson stocks Sunnen® Truing Sleeves in a wide range of sizes. If you... -
Sunnen Honall Guide Hone Mandrel | 5.0mm
$64.56Goodson carries a wide range of Replacement Mandrels for the Sunnen Honall Valve Guide Hone to cover most popular sizes. Fits range from .195" to .200" (4.9 to 4.9mm) Other sizes also available -
Large Point Extention Set | AG-630
$210.74Range: 1.932" to 2.687" Use with Sunnen AG-300 serial number above 4000 -
220 Grit Sunnen Hone Stone | 2.2-2.4" Range | U22-J55
$88.04Fits Sunnen Junior Hone Sets have 2 holders with 4" integral stones and 2 holders with integral aluminum wipers 220 grit Silicon-Carbide abrasive leaves 32 Ra finish Previously sold as JN-301 NOTE: Goodson is authorized to ship Sunnen Products exclusively within The... -
150 Grit Sunnen Honing Stones | 1.42"-1.60" Range | SNJ2-A43
$128.20150 Grit Aluminum-Oxide stones Stone set consists of 3 stones Fit SNJ-10 hone (sold separately) Use for deglazing Nicasil NOTE: Goodson is authorized to ship Sunnen Products only within The United States and Canada. -
Sunnen Zinc Alloy Guide Shoes for PL & ML Series Mandrels
$35.35These guide shoes are sized to fit PL and ML Series Mandrels from Sunnen Zinc Alloy WARNING: This product can expose you to chemicals including Nickel (Metallic), which is known to the State of California to cause cancer. For... -
Sunnen Truing Sleeves | .255"-.260" Range | S-255
$35.09Truing Sleeves are used to ensure the guide shoes and stones are straight and parallel to each other and radiused to approximately the diameter to be honed. Goodson stocks Sunnen® Truing Sleeves in a wide range of sizes. Range: .255"... -
Sunnen Honall Valve Guide Hone Mandrel | 6.6mm
$61.12Goodson carries a wide range of Replacement Mandrels for the Sunnen Honall Valve Guide Hone to cover most popular sizes. Select by size. Fits .255" to .260" (6.5 to 6.6mm) range Order sleeve, stones, adaptor and stone retainer separately -
70 grit Sunnen Hone Stone | 2.4-2.60" Range | V24-J17
$71.41Fits Sunnen Junior Hone Sets have 2 holders with 4" integral stones and 2 holders with integral aluminum wipers 70 grit Silicon-Carbide abrasive gives a 120 Ra finish Previously sold as JN-102 NOTE: Goodson is authorized to ship Sunnen Products exclusively within... -
Sunnen Honall Adaptor | PAK20-A
$126.69Range: .744" to 1.25" (18.9mm to 31.75mm) Use these mandrel adaptors with your Sunnen Honall Hone Head (sold seprately). Use with K, BL, AK, BAL or Y Mandrels. -
Sunnen Honall Adaptor | PSK6-A
$126.69Range: .185" to .240" (4.7mm to 6.1mm). Use these mandrel adaptors with your Sunnen Honall Hone Head. Use with K, BL, AK, or BAL Mandrels . To use the PSK6-A Adaptor with the Sunnen Honall for valve guide honing, you... -
280 Grit Sunnen Hone Stone | 2.2 to 2.4" Range | U22-J65
$48.91Fits Sunnen Junior Hone Sets have 2 holders with 4" integral stones and 2 holders with integral aluminum wipers 280 grit Silicon-Carbide abrasive produces a 20 Ra finish Previously sold as JN-501 NOTE: Goodson is authorized to ship Sunnen Products exclusively within... -
70 Grit Sunnen Honing Stones | 1.75"-2.0" Range | S18-J17
$81.47Sets have 2 holders with 4" integral stones and 2 holders with integral aluminum wipers Gives an 8 Ra finish Previously sold as SN-100 Use with Sunnen's SN-75 Midget Hone (see below)
