485 results
-
Sunnen Truing Sleeves | .370"-.3852" Range | S-370
$34.50Truing Sleeves are used to ensure the guide shoes and stones are straight and parallel to each other and radiused to approximately the diameter to be honed. Goodson stocks Sunnen® Truing Sleeves in a wide range of sizes. Range: .370"... -
Sunnen Ext. Mandrel Retainer | LN-3688A675LH
$74.45Fits both 6.75" mandrels. Long reach is required for Buick 231 (can also be used with Small Block Chevy and Ford). GOODSON is authorized to sell Sunnen in The United States and Canada. -
Sunnen Truing Sleeves | .308"-.316" Range | S-308
$34.50Truing Sleeves are used to ensure the guide shoes and stones are straight and parallel to each other and radiused to approximately the diameter to be honed. Goodson stocks Sunnen® Truing Sleeves in a wide range of sizes. Range: .308"... -
.389" Top Carbide Pilots | CP Series
from $295.98These carbide pilots have a .389" top and measure 7-1/2"L -
Sunnen Water Based Honing Coolant Concentrate for Cast Iron | SCC750005
$445.92Meets the demands of Single-Stroke and metal-bond Superabrasive honing Ideal for honing aluminum or with diamond plated tools Can be used as a general grinding coolant 5 gallons makes up to 55 gallons of coolant Mix ratio: 10:1 Replaces SCC-605... -
Sunnen Dial Bore Gauge Size Setting Adaptor | CF-540
$1,565.30CF-540 Size Setting Adaptor centers gauge probes between parallel reference surfaces. Use with the SCF-502 Setting Fixture (sold separately). -
220 Grit Sunnen Honing Stones | 4.7-15.0" Range | W47-J55
$69.67The Sunnen® W47-J55 220 Grit Honing Stones have integral holders and come in 4-piece sets that include 2 stones and 2 aluminum wipers. These honing stones will fit both Sunnen® AN and Goodson GH hones. 4.7" - 15.0" range (119.4-381.0mm)* For Cast... -
Sunnen Dial Bore Gauge Setting Fixture & Adaptor | SCF-502
$3,095.00The SCF-502 Sunnen Dial Bore Gauge Setting Fixture from Goodson features a heavy stress-relieved cast iron base, lapped carbide micrometer anvils and built-in magnifier for fast, accurate set-up. Each setting fixture includes a master calibrating ring. This model combines a... -
Stone Support for 6.0 - 9.0" Holders | AN-260
$186.12Stone Supports from Sunnen® improve stability and prevent chatter when honing bores over 6" diameter. Use with single or double length master holder sets (sold separately). This Stone Support (AN-260) is for bores 6" to 9" diameter. Additional sizes are... -
70 grit Sunnen Honing Stones | 3.5"-5.5" Range | N37-J17-71
$68.38The Sunnen® Brand N37-J17-71 70 Grit Honing Stones have integral holders and come in 4-piece sets that include 2 short stones (2-13/16") and 2 short aluminum wipers 2-13/16"). These honing stones will fit both Sunnen® AN and Goodson HN hones.... -
220 Grit Sunnen Honing Stones | 3.5"-5.5" Range | N37-J55-71
$50.17The Sunnen® Brand N37-J55-71 220 Grit Honing Stones have integral holders and come in 4-piece sets that include 2 short stones and 2 short aluminum wipers (2-13/16"). These honing stones will fit both Sunnen® AN and Goodson GH hones. 3.5" -... -
400 Grit Sunnen Honing Stones | 3.5"-5.5" Range | N37-J85
$43.62For all popular AN-style hones and hone bodies. Integral holder type sets have 4 pieces: 2 holders with stones and 2 holders with aluminum wipers. For Hard Sleeves Range: 3.5" to 5.5" (88.9 to 139.7mm) Yields a 5Ra finish NOTE:... -
220 Grit Sunnen Honing Stones | 2.7" to 4.1" Range | M27-J55
$43.62The Sunnen® M27-J55 220 Grit Honing Stones have integral holders and come in 4-piece sets that include 2 stones and 2 aluminum wipers. These honing stones will fit both Sunnen® AN and Goodson HN hones. 2.7" -4.1" range (68.6-104.1mm) For Cast... -
400 Grit Sunnen Hone Stone | 2.2 to 2.4" Range | U22-J87
$50.45Stones fit the Sunnen Junior Hone (JN-95) Sets have 2 holders with 4" integral stones and 2 holders with integral aluminum wipers These 400 grit stones will give an 8 Ra finish Silicon-Carbide abrasive NOTE: Goodson is authorized to ship Sunnen... -
Sunnen Brass Guide Shoe & Screw Set | CK-3120
$107.74These brass guide shoes fit all CV-616 hones, and CK-10 hones if equipped with Sunnen Master Holder Sets. WARNING: This product can expose you to chemicals including Nickel (Metallic), which is known to the State of California to cause cancer.... -
150 Grit Sunnen Honing Stone | 1.75"-2.0" Range | S18-J45
$42.64Sets have 2 holders with 4" integral stones and 2 holders with integral aluminum wipers Gives a 45 Ra finish Previously sold as SN-200 Use with Sunnen SN-75 Midget Hone -
Sunnen Honing Stones | EHN-Series
$161.84Premium quality replacement stones for all CV-616 and CK-10 hones equipped with Sunnen Master Holder Sets. For diameter range of 4.125" to 5.000". 2 stones per set, 6 sets per package. -
150 Grit Sunnen Honing Stones | 4.7-15.0" Range | W47-J45
$43.62The Sunnen® Brand W47-J45 150 Grit Honing Stones have integral holders and come in 4-piece sets that include 2 stones and 2 aluminum wipers. These honing stones will fit both Sunnen® AN and Goodson GH hones. 4.7" - 15.0" range (119.4-381.0mm)* For... -
Valve Seat Pocket Cutter Accessories
from $5.20For the Sunnen VGS-300 Valve Seat Pocket Cutter -
VR-1703 | Valve Refacer Stem Wheel
$299.99Cup Profile. Fits the Sunnen VR-7000 and VR-8000 Centerless Grinders.
