485 results
-
40-45 Degree VSC Standard Valve Seat Cutter | VSC9-04045
$178.99Use with your Sunnen VSC system. 40º Top Angle | 45º Seat Angle | 12mm Radius 1.0mm (.040") Seat Width | Profile #11. Ideal for Motorcycle & High Performance (#4047B). -
220 Grit Honing Stone For CK/CV Type Machines | C30-A55
$161.84For all popular CK/CV Type Machines 6 pair per package Recommended for Dart™ Machinery blocks and ductile sleeves Use with Sulfurated Rod Honing Oil (RHO-10 or RHO-50) -
70 Grit Honing Stone Set for Harley/VW | AN-100F
$109.04The Sunnen® AN-100F 70 Grit Honing Stones have integral holders and come in 4-piece sets that include 2 stones and 2 aluminum wipers. These honing stones will fit both Sunnen® AN and Goodson HN hones. 2.7" - 4.1" range (68.6-104.1mm) For... -
38-45-52 Degree VSC Standard Valve Seat Cutter | VSC-513
$188.84Use with your Sunnen VSC system. Longer throat length. 38º Top Angle | 45º Seat Angle | 52º Throat Angle 1.0mm (.040") Seat Width | Profile #23. Ideal for USA High Performance. -
280 Grit Sunnen Hone Stone | 2.0-2.2" Range | T20-J65
$101.57Fits Sunnen Junior Hone Sets have 2 holders with 4" integral stones and 2 holders with integral aluminum wipers 280 grit Silicon-Carbide abrasive Previously known as JN-500 NOTE: Goodson is authorized to ship Sunnen Products exclusively within The United States and... -
Sunnen Valve Guide Roughing Stone Sets
from $72.27These Roughing Stone Sets from Sunnen are sized to fit the Sunnen Honall® Head and Adaptor (P-180). Sets include 6 stones, except for the L6-J47 which includes 12. -
Bushing Expander Replacement Parts
from $58.35Use with ALR series bushing expander mandrels -
VSI-A09040 Valve Seat Cutter Blade
$72.99Top Angle: 30º | Seat Angle: 45º | Throat Angle: 60ºSeat Width: 1.050mm (.040") | Top Width: 2.00mm ( .080") | Minimum Dia.: 25.39mm (1.00")Serdi Equivalent: 10K45XU60-A1 | Newen Equivalent: WA1-NWN4303 | VSC Equivalent: VSC-04045 -
VSI-A04040 Valve Seat Cutter Blade
$72.99Top Angle: 30º | Seat Angle: 37.5º | Throat Angle: 60ºSeat Width: 2.00mm (.080") | Top Width: 2.00mm ( .080") | Minimum Dia.: 25.39mm (1.00")Serdi Equivalent: 20K37.5X60-A1 | Newen Equivalent: WA1-NWN5417 -
Sunnen Honing Stones for Power Hone | CR Mandrel
$50.17Rod honing stones for Sunnen CR-Series mandrels Select by mandrel size and application 2 stones per box -
VR-606 | Valve Refacer Wheel
$329.99For TR-6700 Tappet Grinder Chilled Iron Lifters -
VSI-A00428 Valve Seat Cutter Blade
$164.79Top Angle: 15º | Seat Angle: 30º | Throat Angle: 60º Seat Width: 2.50mm (.098") | Top Width: 1.4mm ( .055") | Minimum Dia.: 25.39mm (1.00") Serdi Equivalent: 25G30U60-A1 | Newen Equivalent: WA1-NWN2252 -
.500" OD | Piloted Core Reamer | DRT-2097
$134.99.500" OD .500" drive end with flat Pilot size is carefully matched to the OD of the corresponding core drill (see below) Assures accurate location of the reamer for smooth, vibration-free operation Gives proper interference fit to match manufacturer's specifications... -
PHW-383 | Wave Spring Washer
$2.95 -
.389" Top Hardened Steel Pilots | VS series
from $81.99Use with Sunnen SGM & VGS systems. Please note that there are two lengths available. Items with a trailing E are 7-1/2" Long and those without a trailing letter are 6-1/2" long. -
40-45-70 Degree VSC Standard Valve Seat Cutter | VSC10-06045
$188.84Use with your Sunnen VSC system. 40º Top Angle | 45º Seat Angle | 70º Throat Angle | 12mm Radius 1.5mm (.060") Seat Width | Radius: 12mm | Profile #12. Ideal for Motorcycle & High Performance. -
38-45-52 Degree VSC Standard Valve Seat Cutter | VSC2-06045
$188.84Use with your Sunnen VSC system. 38º Top Angle | 45º Seat Angle | 52º Throat Angle 1.5mm (.060") Seat Width | Profile #4. Ideal for High Performance. -
.236" Top Pilots for 3-Angle Seat Cutter Kits | CVP Series
from $299.99These carbide pilots have a .236" top and measure 5-11/16"L. Use with your Sunnen SGM-700 and VSC-700 3-Angle Seat Cutter Kits -
VR-607 | Valve Refacer Wheel
$229.99General Purpose Grinding Wheel. Use with water soluble coolant only. -
400 Grit Honing Stone For CK/CV Type Machines | C30-J85
$161.84For all popular CK/CV Type Machines 6 pair per package Recommended for Dart™ Machinery blocks and ductile sleeves Use with Sulfurated Rod Honing Oil (RHO-10 or RHO-50)
