14 results
-
3-D Fast Cut™ Setting Micrometer | MGA-MIC
$559.99Exclusive Goodson Design 7075 Aircraft Aluminum Frame Direct reading micrometer is accurate to .001" and repeatable 1" to 3" capacity Carbide anvil Features a precision drill bushing for standard or pilot to ride on Standard micrometer uses tapered .375" pilot... -
Round Anvil Micrometer | MIC-01-B
$137.99This round anvil micrometer is ideal for measuring bearing thicknesses. It features a ratchet spindle and is precise to .0001". -
Micrometer Stand | MIC-FIX
$49.99Use this micrometer stand to hold micrometers, standards or virtually anything you need an extra hand for. It is made of heavy cast iron to stand up to daily use. The swivel head with padded jaws won't damage your micrometers. -
MGA-MIC-1S | 3-D Fast Cut Micrometer Calibration Standard
$99.99Use this calibration standard with the 3-D Fast Cut Micrometer. Precision ground and polished tool steel construction. -
Mitutoyo Dial Bore Gauge Set | MMCB-06
$699.99Rugged bore gauge with protected dial Accuracy: .0002" Carbide tipped contact points .0001" (.001mm) graduations Indication stability: .00008" Shoe can be rotated for a fresh wear surface Sets up with a standard micrometer Range: 2.0" to 6.0" Includes 11 anvils... -
Adjustable Probes for Small Diameter Sunnen Dial Bore Gauge GR-3000
$258.31Measure extra-small bores from .054" (1.37mm) to .535" (13.59mm). Set with the Sunnen SCF-502 setting fixture (sold separately). Select only the probe(s) you need. -
Adjustable Counterbore Cutter Kit
$2,599.99The Goodson Adjustable Counterbore Cutter Kit is back by popular demand! Cutter assemblies feature positive-stop adjusting screws to prevent cutters from changing dimensions while in use. The built-in direct reading micrometer and dial indicator make set-up fast and incredibly accurate.... -
Telescoping Gauge Set 5/16"-6" | MTG-6
$149.99This 6 piece set is ideal for measuring inside of guides, guide bores, cylinders, etc. Size range: 5/16" to 6" Compress the spring plunger and lock by twisting the handle Insert into bore and release the plunger; it will expand... -
Sunnen Dial Bore Gauge Setting Fixture & Adaptor | SCF-502
$3,095.00The SCF-502 Sunnen Dial Bore Gauge Setting Fixture from Goodson features a heavy stress-relieved cast iron base, lapped carbide micrometer anvils and built-in magnifier for fast, accurate set-up. Each setting fixture includes a master calibrating ring. This model combines a... -
Sunnen Dial Bore Gauge Setting Fixture | CF-1126
$3,250.00The CF-1126 Sunnen Dial Bore Gauge Setting Fixture from Goodson features a heavy stress-relieved cast iron base, lapped carbide micrometer anvils and built-in magnifier for fast, accurate set-up. Each setting fixture includes a master calibrating ring. This model combines a... -
Bifocal Magnifying Safety Glasses
$14.49Prevent damage to expensive prescription safety glasses when only magnification is required. Read micrometers and setting fixtures without having to find a magnifying glass. Can be worn under welding helmet for those close-up jobs. Several magnifications available. -
Bucket Lifter Grinder Assembly | BLG-1000
$899.99Machine just the bucket lifter! Fast and accurate Save time — measure once, then remove the material from inside the Bucket Lifter instead of machining the stem height and finding the right VAD thickness or grinding the seat to meet... -
Micrometer best practices
We’re going to back up a little to something that’s an essential skill to have in engine machining or any kind of machining for that matter. You MUST know how to operate and read and care for a micrometer. It... -
3-D Fast Cut Setting Micrometer | Tech Lab Tuesday
Today's episode of Tech Lab Tuesday is the start of a multi-part series on the Goodson 3-D Fast Cut Valve Seat Cutting System. In this episode, Dave Monyhan talks about our new 3-D Fast Cut Setting Micrometer (MGA-MIC). This tool...
